How To Use

      DIRTY DOWN AGING SPRAYS – USER INSTRUCTIONS

         

        Before You Spray:

        • Ensure surfaces are dry and grease-free
        • Mask off areas you don’t want affected
        • Shake the can well before each use

         

        Application Tips:

        • Apply in light, even coats (the shade darkens with each layer)
        • Hold the can 30cm (12 inches) from the surface
        • Keep the nozzle fully pressed down – half-pressing can cause spotting
        • For small patches, use a paper stencil
        • Darker patches, spray closer to the surface
        • Spray in one smooth sweep across the surface
        • Avoid heavy spraying – it may drip or puddle

         

        Smearing the Effect:

        • Re-wet with water, then dab or rub with a damp cloth
        • Best results occur while still wet, but smearing is also possible when dry
        • May not smear well on absorbent surfaces

         

        Important Notes:

        • May not stick to polished surfaces
        • Effects are water soluble—they will wash off but may leave stains
        • Always test on a hidden area first
        • Do not use in wet weather

         

        Washing Instructions:

        • Tough residue: Try methylated spirits (test!)
        • Fabric: Use quality detergent and stain remover
        • Plastic: Clean with mild detergent and water

         

        DIRTY DOWN LIQUID EFFECTS - USER INSTRUCTIONS

         

        IMPORTANT:

        • A 25ml bottle covers approximately 3×3 feet / 1×1 meters / 1 m²
        • A 250ml bottle covers up to 30×30 feet / 9×9 meters / 83 m²

        Coverage may vary depending on surface texture and application thickness.

         

        Before Use:

        • Shake thoroughly until the ball bearing rattles
        • Stir with an old brush until all lumps are gone
        • Keep both the pot and the surface at room temperature
        • Tip: Warm the pot in your pocket for 30–60 min before use for easier mixing

         

        Usage Instructions:

        • Always clean the brush immediately after use with water or methylated spirits
        • Do not let paint dry and harden on the brush
        • The liquid will settle—shake and stir thoroughly before each use
        • Apply straight from the pot; replace lid quickly during use to prevent thickening
        • Evaporation thickens the paint and darkens the colour
        • Ensure surfaces are clean, dry, and non-porous (glass, sealed wood, painted walls, plastic, etc.)
        • Avoid porous materials like raw timber or paper
        • Effects may wash off with water or handling when wet
        • If applying to painted surfaces, test first and seal if needed
        • To lighten:
          • Add water to a separate pot (not the original!)
          • Or use a damp brush during application

         

        For Grooves or Texture:

        • Apply paint, then wipe raised areas with a damp cloth at an angle to leave pigment in recesses

         

        To Darken:

        • Apply multiple coats
        • Let each coat fully dry before the next

         

        For Patchy Effects:

        • Apply in small uneven patches and let dry irregularly

         

        For Shade Variation:

        • While wet or dry, dab with a damp brush or cloth
        • Or splash with water and let dry without touching
        • The more water used, the more separation into light/dark tones

         

        For Very Dark Shades:

        • Let paint evaporate in a separate pot before use (thickens & darkens it)

         

        Brush Application Tips

        • Dab for texture, brush smoothly for even coverage
        • Use brushes dry, damp, or wet to vary effects
        • Brush Types:
          • Fine Soft Brush: Precise detail work
          • Stiff Brush: For light touches or dry-brushing
          • Large Soft Brush: Broad area shading

        Spray Application Tips

        • Clean your spray equipment immediately after use
        • Use airbrush or pressure pot spray gun

        Wiping Techniques

        With a Cotton Bud:

        • Dampen one end, keep the other dry
        • Wipe with wet end, then clean with dry end

        With Kitchen Roll:

        • Apply paint, let dry
        • Dampen one end of paper towel
        • Blot and twist in place, don’t rub!
        • Wetter areas will dry darker — test and practice first

        Creating Shades with Water

        • Add water to the surface as paint dries for natural separation
        • Use either wet or dry paint to experiment with results

        Dirty Down Aging Sprays - User Instructions

        Dirty Down Liquid Effects -User Instructions

        Dirty Down - Resin Effect User Instructions